Part Number: W400

Pro Deck Master Adjustable Pylon

Do you have an outboard boat that you’d like to safely ski behind, but it is not outfitted with a pylon? Barefoot International has you covered! Our stainless-steel pylons use triangular geometry and high-quality steel to produce a rock-solid hitch point for your rope.

In this case… you don’t even need a horizontal surface to safely mount the pylon to. The Pro Deck Master Adjustable pylon was designed with a hinged base so that it can be mounted on an angled surface with the pylon remaining vertical. Stainless steel support arms create the same rock-solid foundation as any of our other pylon offerings. It is adjustable from 32” to 57” in height. This pylon is also equipped with a Delrin swivel at the hitch point to reduce strain on your ropes and make for seamless transfers from side to side behind the boat. If you’d like to get an idea of what you’re getting into with the installation of this pylon you can view the instructions by clicking on “support” at the top of this page, then the “instructions” tab on the next page, and lastly by clicking on this product.

WARNING! Aftermarket pylons should NOT be used to tow tubes/other inflatables, multiple skiers, or stranded boats. They are only safety rated for one individual skier/wakeboarder.

WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.